User's Manual

SC 4812ET/SC 614 BTS DC Power Sharing

– continued

Apr 2001

V0D.03

4812ET RF and Power Cabinet Hardware Installation Manual

DRAFT

151

Table D-4: Reinstall the Access Panel (SC 614)

Step Action

1 Loosen the three (3) nuts that hold the I/O cover in place at the bottom of the BTS (see Figure D-5).

and reinstall the panel.

NOTE

The access panel is a two–piece panel; install the right side first.

In order to keep radiated and conducted emissions within

specifications, it is necessary to install all 3 of the nuts and

torque them properly.

IMPORTANT

ACCESS

PANEL

Figure D-5: Reinstall Access Panel