User's Manual

Cabinet Cabling
– continued
Apr 2001
V05.03
111
SC
TM
4812ET RF and Power Cabinet Hardware Installation Manual
DRAFT
Table 5-28: Wire, Lug, and Die Table
Wire Size Color and Die
Motorola Part Number
for Lugs
AWG Metric (mm)
Welding
(Superflex)
Circular
Mills Area
Code
CGDS256306951514 2/0 AWG 60–70 1/0 133,400 BLACK 45
CGDS256306951539 3/0 AWG 85–95 2/0 167,800 ORANGE 50
CGDS256306951515 4/0 AWG 100–107 3/0 211,600 PURPLE 54
CGDS256306951540 N/A N/A 4/0 250,000 YELLOW 62
Power Input Connections
Figure 5-10 shows how the power cable is connected to the RF and
Power Cabinet. Figure 5-1 (on page 85) shows the location of the DC
power connector in the RF Cabinet and Power Cabinet.
Figure 5-10: Connecting Power Cables
CABLE
GROMMET
LUG COVER
M10 NUT (17 mm Hex
Driver Required)
M10 LOCK WASHER
M10 FLAT WASHER
CRIMP LUG
FEED COVER
(Do not remove)
ENCLOSURE
BASE
POWER
INPUT
STUD
Route the cables through the rubber boot BEFORE
crimping lug onto wire or damage to the boot can occur.
CAUTION
5