Installation Instructions

SU Cabling – continued
PRELIMINARY
SCt300 BTS Hardware Installation, ATP and FRU Procedures
DEC 2000
6-48
Figure 6-33: SU Cabling Details for Single MicroCell or Picocell
SU RF
SU 2
SU 1
H
H
MICROCELL PICOCELL
SU Cabling for Multi–Unit
Configurations
Table 6-42 gives the procedure to install the SU cabling for Multi–unit
configurations. Figure 6-34, Figure 6-35 and Figure 6-36 show the SU
cabling for multi–unit configurations.
Table 6-42: Install SU Cabling for Multi–BTS Configurations
Step Action
1 Connect cable H to the appropriate SU connectors as shown
in Figure 6-34, Figure 6-35 and Figure 6-36.
2 Torque the connectors at each end of the cable to 9 in–lb. Use
a 5/16–in. breakaway torque wrench.
3 Terminate all unused SU connectors.
6