Installation Instructions

Acceptance Tests – continued

DEC 2000

8-7

SCt300 BTS Hardware Installation, ATP and FRU Procedures

PRELIMINARY

Code domain power noise, pilot power, and total power

You will verify that the code domain noise floor of all unused Walsh

codes within the CDMA spectrum measures < –27 dB (with respect to

total power). Pilot power will be verified to measure –7.04 dB +/–0.5

dB (with respect to standard test patterns). Total power will be verified

to measure +2/–4 dB (with respect to CDF specific file parameters).

BTS frequency accuracy

BTS frequency accuracy can be verified manually during normal

operation by monitoring the 19.6608 MHz reference (19 MHz) from the

Diagnostic Access Area. A frequency counter with an accuracy of +/–

0.005 ppm can be used to check the BTS frequency accuracy.