Installation Instructions

Copy LMF CAL File to CBSC
DEC 2000
7-61
SCt300 BTS Hardware Installation, ATP and FRU Procedures
PRELIMINARY
Overview
After you perform the ATP you must move a copy of the CAL file for
the BTS from the LMF to the CBSC. This is normally done by putting a
copy of the CAL file on a floppy disk and then using the floppy disk to
move the CAL file to the CBSC.
Prerequisites
You must complete the following steps before you copy the LMF CAL
file to the CBSC:
S A DOS formatted 1.44 MB 3 1/2–in. floppy disk is necessary to do
this procedure.
S The ATP and Audit procedures have successfully been performed.
S The Create CAL File procedure was performed.
S You logged out of the BTS.
Copying CAL Files from LMF to
a Diskette
Follow the procedure in Table 7-33 to copy CAL files from an LMF
computer to a 3.5 diskette.
Table 7-33: Copy Files from LMF to a Diskette
Step Action
1 Insert a diskette into your Windows A: drive.
NOTE
If your diskette has not been formatted, format it using Windows. The diskette must be DOS
formatted before copying any files. Consult your Windows/DOS documentation or online help on
how to format diskettes.
2 Click on the bold Start button to launch the Windows Explorer program from your
Programs menu list.
3 Click on your C: drive
4 Double click on the wlmf folder.
5 Double–click on the CDMA folder
6 Double click on the bts–# folder for the file you want to copy.
7 Drag the file (for example, BTS–#.cal, BTS–#.txt, BTS–#.htm, BTS–#.xls) to the
3–1/2–in. floppy (A:) icon on the top left of the screen and release the mouse button.
8 Repeat step 6 and 7 until you have copied each file desired and close the Windows Explorer
program by selecting Close from the File menu option.
7