Installation Instructions

Span Line Daisy Chain Cabling for Sites Equipped with Optional Primary

Surge Suppressor

– continued

DEC 2000

5-39

SCt300 BTS Hardware Installation, ATP and FRU Procedures

PRELIMINARY

Cable Connections

Table 5-21 shows the cable run information for span line daisy chain

cabling for BTSs equipped with the Primary Surge Suppressor.

For a full signal description of the Site I/O cable refer to Table 5-14 in

the “Site I/O, Span Line, RGPS and Modem Cabling for Sites Equipped

with Optional Primary Surge Suppressor” procedure.

The pin number and wire color are based on the Site I/O

cable. The pin number corresponds to pins on the Site I/O

junction box connectors.

NOTE

Table 5-21: Cable Run List for Span Line Daisy Chain Cabling

BTS 1 (Secondary Backhaul) BTS 2 (Primary Backhaul)

Punchdown

Block Location

Desc. Punchdown

Block Location

Desc.

OSP 23T RX TIP OSP 22T TX TIP

OSP 23R RX RING OSP 22R TX RING

OSP 24T TX TIP OSP 21T RX TIP

OSP 24R TX RING OSP 21R RX RING