Installation Instructions

DEC 2000

SCt300 BTS Hardware Installation, ATP and FRU Procedures

PRELIMINARY

List of Tables

SCt300 BTS Hardware Installation, ATP and FRU Procedures

Software Release 2.15.x.x

Table 1-1: Tools and Materials for Pole Mounting 1-13. . . . . . . . . . . . . . . . . . . . . . .

Table 1-2: Tools and Materials for Rack Mounting 1-13. . . . . . . . . . . . . . . . . . . . . .

Table 1-3: Mounting Bracket Tools and Materials for Concrete Wall Mounting 1-14

Table 1-4: Tools and Materials for Concrete Ceiling 1-15. . . . . . . . . . . . . . . . . . . . .

Table 1-5: Tools Required to Perform FRU Procedures 1-21. . . . . . . . . . . . . . . . . . .

Table 2-1: Procedure to Prepare the Site for the BTS 2-7. . . . . . . . . . . . . . . . . . . .

Table 2-2: Installation Dimensions for the MicroCell and PicoCell Units 2-8. . . .

Table 2-3 Minimum Clearances MicroCell and PicoCell Units 2-9. . . . . . . . . . . . .

Table 2-4 Minimum Clearances for Surge Suppressor 2-9. . . . . . . . . . . . . . . . . . . .

Table 3-1: Mounting Bracket Tools and Materials for Concrete Wall Mounting 3-5

Table 3-2: Procedure to Drill Holes in the Wall for

Mounting Bracket Installation 3-6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 3-3: Procedure to Secure the Mounting Bracket to a Wall 3-7. . . . . . . . . . . .

Table 3-4: Tools and Materials for Concrete Ceiling 3-10. . . . . . . . . . . . . . . . . . . . .

Table 3-5: Procedure to Secure the Mounting Bracket to the Adapter 3-11. . . . . . . .

Table 3-6: Tools and Materials for Pole Mounting 3-12. . . . . . . . . . . . . . . . . . . . . . .

Table 3-7: Procedure for Attaching the Mounting Bracket to a Pole 3-13. . . . . . . . .

Table 3-8: Tools and Materials for Rack Mounting 3-16. . . . . . . . . . . . . . . . . . . . . .

Table 3-9: Procedure to Attach the Mounting Bracket to a Rack 3-16. . . . . . . . . . . .

Table 3-10: Procedure to attach Back Solar Cover to Mounting Bracket 3-19. . . . .

Table 3-11: Installing the RGPS Head 3-21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-1: Cable Descriptions and Part Numbers 4-2. . . . . . . . . . . . . . . . . . . . . . . .

Table 4-2: Microcell Expansion Kit for Units 1 to 2

Short MIB A (Cubicle) – T448AL 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-3: Microcell Expansion Kit for Units 1 to 2

Long MIB A (Non–Cubicle) – T448AM 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-4: Picocell Expansion Kit for Units 1 to 2

Short MIB A (Cubicle) – T448AN 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-5: Picocell Expansion Kit for Units 1 to 2

Long MIB A (Non–Cubicle) – T448AP 4-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Table 4-6: Microcell/Picocell Expansion Kit for Units 2 to 3

Current 2m MIB B – T448AR 4-5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .