Installation Instructions

Cable Descriptions – continued
PRELIMINARY
SCt300 BTS Hardware Installation, ATP and FRU Procedures
DEC 2000
4-4
Motorola Kits for Multi–Unit
Installations
Table 4-2 through Table 4-11 gives the Motorola Kit numbers, cable
descriptions and part numbers for the Motorola kits required to perform
a multi–unit installation. Several kits are available depending upon the
carrier installation.
Table 4-2: Microcell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AL
Cable Qty. Motorola Part
Number
Description
n/a 2 5882106P01 50 Ohm Antenna Terminator
A 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lug
connector.
K 1 3087707C09 MIB A cable (short, 1m; micro)
Q 1 3088120C01 Long SU Cable
Table 4-3: Microcell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AM
Cable Qty. Motorola Part
Number
Description
n/a 2 5882106P01 50 Ohm Antenna Terminator
A 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lug
connector.
E 1 3087707C03 MIB A cable (current, 2m; micro)
Q 1 3088120C01 Long SU Cable
Table 4-4: Picocell Expansion Kit for Units 1 to 2 Short MIB A (Cubicle) – T448AN
Cable Qty. Motorola Part
Number
Description
A 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lug
connector.
L 1 3087707C10 MIB A cable (short 1m; pico)
Q 1 3088120C01 Long SU Cable
Table 4-5: Picocell Expansion Kit for Units 1 to 2 Long MIB A (Non–Cubicle) – T448AP
Cable Qty. Motorola Part
Number
Description
A 1 3087701C02 Ground cable, 8 -AWG, insulated copper wire. Requires one ring lug
connector.
H 1 3087707C06 MIB A cable (long, 2m; pico)
Q 1 3088120C01 Long SU Cable
4