User's Manual
Index – continued
PRELIMINARY
SC 4812ETL BTS Optimization/ATP
08/15/2000Index-4
HP 83236A, F-5
HP 8921A/600 test set, 1-8
HP8921A, F-5
HSO, 1-18
HSO Initialization/Verification, 3-37
Huber & Suhner, required test equipment, 1-9
HyperTerminal, Creating named HyperTerminal
connection, 3-13
HyperTerminal , create named connection, 3-13
I
I and Q values, E-1
Initial HP8921A setup, F-10
Initial Installation of Boards/Modules, preliminary
operations, 2-1
Initial power tests, test data sheets, A-3
Inter–frame cabling, when to optimize, B-2
Intermediate file, generate ATP file using, 4-20
Internal FRUs, 1-17
IS–97 specification, E-1
ISB Inter Shelf Bus connectors, 6-14
L
LAN
BTS frame interconnect, illustration, 3-28
optional test equipment, 1-10
LED Status Combinations for all Modules except
GLI2 CSM BBX2 MCC24 MCC8E, 6-22
LFR, receiver operation, test data sheets, A-6
LMF, F-1, F-7
BTS connection, 3-20
logout procedure, 5-4
platform requirements, 1-6
remove from BTS, 5-4
shut down UNIX, 5-4
terminal, 1-6
to BTS connection, 3-4, 3-9
TX acceptance tests, 4-3
view CDF information, 3-3
lmf Folder, 3-15
Load Center Wiring, 2-5
loads folder, 3-17
Local Maintenance Facility. See LMF
Log out
of BTS, 5-4
of LMF PC, 5-4
Logging Into a BTS, 3-21
Logging Out, 3-24
LORAN–C Initialization/Verification, 3-45
LPA errors, 6-6
LPA Module LED, 6-28
LPA Shelf LED Status Combinations, 6-28
M
Master Group Line Interface. See MGLI
MASTER LED, GLI, 6-25
MCC LED Status Combinations, 6-27
MMI common connections, 3-27
MMI Connector
CSM, 6-24
GLI, 6-26
MMI Connectors, MCC, 6-27
MMI equipment setup, 3-27
Module status indicators, 6-22
MPC, 1-18
Multi Channel Card. See MCC
Multi–FER test Failure, 6-11
N
New installations, 1-4
No AMR control, 6-17
No BBX2 control in the shelf, 6-17
No DC input voltage to Power Supply Module, 6-18
No DC voltage +5 +65 or +15 Volts to a specific
GLI2 BBX2 or Switch board, 6-19
No GLI2 Control through span line connection, 6-16
No GLI2 Control via LMF, 6-16
No or missing MCC24 channel elements, 6-17
No or missing span line traffic, 6-17
North American, cellular telephone system frequency
spectrum, CDMA allocation, D-4