User's Manual

Index – continued
08/15/2000
SC 4812ETL BTS Optimization/ATP
PRELIMINARY
Index-3
D
data Folder, 3-18
DC Power Pre–test (BTS Frame), 2-7
DC Power Problems, C–CCP Backplane
Troubleshooting, 6-18
DC/DC Converter LED Status Combinations, 6-22
Detailed, optimization/ATP test matrix, B-2
Devices, download. See Download
Digital Control Problems, 6-16
C–CCP Backplane Troubleshooting, 6-16
Digital multimeter, required test equipment, 1-9
Directional coupler, required test equipment, 1-9
Documents, required, 1-12
Download
See also Devices
BTS, 3-30
BTS system software, 3-3
Download BLO Procedure, 3-70
Download from the CBSC, prepare to leave the site,
5-3
download ROM and RAM code, G-2
Download/Enable MCCs, 3-35
Download/Enable MGLIs, 3-32
Duplexer, optional test equipment, 1-10
Duplexer/Directional Coupler DDC, 1-18, 1-20, 1-21
E
E1, isolate BTS from the E1 spans, 3-4
Enable CSMs & BDCs, 3-34
End LMF session, 5-4
Equipment Overview, 1-14
Equipment warm-up, 3-49
establish MMI communication, 3-26
Ethernet LAN
interconnect diagram, 3-28
transceiver, 1-7
Every test fails, Troubleshooting, RFDS, 6-20
F
Failure report generation, 4-20
FER, acceptance test, 4-19
Files
calibration data file, BLO, 3-66
intermediate file, 4-20
Filtronics, low IM Duplexer (Cm035–f2) or
equivalent, optional test equipment, 1-10
Fluke, model 8062A with Y8134 test lead kit, test
equipment, 1-9
Folder Structure Overview, 3-15
Frame, equipage preliminary operations, 2-1
FREQ Monitor Connector, CSM, 6-24
Frequency counter, optional test equipment, 1-10
G
Gain set point, C-1
Generating an ATP Report, 4-20
General optimization checklist, test data sheets, A-4
Gigatronics 8542B power meter, illustration, F-20
GLI Connector, 6-14
GLI Ethernet A and B Connections, 6-15
GLI LED Status Combinations, 6-25
GLI Pushbuttons and Connectors, 6-26
GLI2, 1-18
GLI2 Front Panel Operating Indicators, 6-26
GPIB, F-1, F-5, F-7
cables, 1-8
GPS, receiver operation, test data sheets, A-5
GPS Initialization/Verification
estimated position accuracy, 3-40
surveyed position accuracy, 3-40
GPS satellite system, 3-35
Group Line Interface. See GLI
H
Hardware Requirements, 1-6
High Stability 10 MHz Rubidium Standard, optional
test equipment, 1-11
High–impedance conductive wrist strap, required test
equipment, 1-9