User Manual

CSM System Time – GPS & HSO Verification – continued

PRELIMINARY 2

SC 4812ET BTS Optimization/ATP – CDMA LMF

July 1999

3-34

GPS Initialization/Verification

Follow the steps outlined in Table 3-21 to connect to CSM–1 installed in

the C–CCP shelf, verifying that it is functioning normally.

Table 3-21: GPS Initialization/Verification

Step Action

1 To verify that Clock alarms (0000), Dpll is locked and has a reference source, and

GPS self test passed messages are displayed within the report, issue the following MMI

command

bstatus

– Observe the following typical response:

CSM Status INS:ACTIVE Slot A Clock MASTER.

BDC_MAP:000, This CSM’s BDC Map:0000

Clock Alarms (0000):

DPLL is locked and has a reference source.

GPS receiver self test result: passed

Time since reset 0:33:11, time since power on: 0:33:11

. . . continued on next page