User Manual

Download the BTS – continued
PRELIMINARY 2
SC 4812ET BTS Optimization/ATP – CDMA LMF
July 1999
3-28
Enable MCCs
This procedure configures the MCC and sets the “tx fine adjust”
parameter. The “tx fine adjust” parameter is not a transmit gain setting,
but a timing adjustment that compensates for the processing delay in the
BTS (approximately 3 S).
Follow the steps outlined in Table 3-19 to enable the MCCs installed in
the C–CCP shelves.
The MGLI, and CSM must be downloaded and enabled,
prior to downloading and enabling the MCC.
IMPORTANT
*
Table 3-19: Enable MCCs
 Step Action
1 Click on the target MCC(s) or from the Select pull down menu choose All MCCs.
2 From the Device menu, select Enable
A status report is displayed confirming change in the device(s) status.
Click OK to close the status report window.
3