User Manual

Download the BTS – continued

July 1999

3-25

SC 4812ET BTS Optimization/ATP – CDMA LMF

PRELIMINARY 2

Table 3-16: Download Code

 Step Action

1 Download code to all devices.

2 Select all devices to be downloaded.

3 From the Device pull down menu, select Download Code.

Download Data to Non–MGLI

Devices

Non–MGLI2 devices can be downloaded individually or all equipped

devices can be downloaded with one action. Data is downloaded to the

MGLI as part of the download code process.

When downloading multiple devices, the download may

fail for some of the devices (a time out occurs). These

devices can be downloaded separately after completing the

multiple download.

NOTE

Follow the steps in Table 3-17 to download the code and data to the

non–MGLI2 devices.

Table 3-17: Download Data to Non–MGLI Devices

 Step Action

1 Select the target CSM, BBX2 and MCC device(s). From the Device pull down menu, select

Download Data.

NOTE

If the CSM(s) and other shelf devices are selected, the Device pull down on the BTS tab must be

used (not the one on the shelf).

A status report is displayed that shows the result of the download for each selected device.

2 Click OK to close the status report window.

NOTE

After a BBX2, CSM or MCC is successfully downloaded with code and has changed to the

OOS–RAM state (yellow), the status LED should be rapidly flashing GREEN.