User Manual

Using CDMA LMF – continued
PRELIMINARY 2
SC 4812ET BTS Optimization/ATP – CDMA LMF
July 1999
3-22
Disabling Devices
Use the Disable menu item from the Device menu list is to take an
INS (green) device out of service and place it in the OOS_RAM
state (yellow). The device retains its code load and data load. The device
can be put back in service using the Enable menu.
Follow the procedures in Table 3-12 to disable devices.
Table 3-12: Disable Devices
 Step Action
1 Select the device(s) you wish to disable.
2 Click on Device from the menu bar.
3 Click on Disable from the Device menu list.
The selected device(s) that successfully go to OOS_RAM change color to yellow.
4 Click on OK to close the status report window.
Resetting Devices
Use Reset to place a device into OOS_ROM. The code and data load for
the device are lost. Follow the procedure in Table 3-13 to reset devices.
Table 3-13: Resetting Devices
 Step Action
1 Select the device(s) to be placed out of service.
2 From the Device menu bar, select Reset.
3 Click on Reset from the Device menu list.
The selected devices that successfully change status to OOS_ROM change color to blue.
4 Click on OK to close the status report window.
Getting Status of Devices
Use the Status menu item from the Device menu list to get a status
report of the device(s) in your BTS configuration.
Follow the procedures in Table 3-14 to get the status of devices.
Table 3-14: Get Device Status
 Step Action
1 Click on the device(s) you wish to get status for.
2
Click on the Device from the menu bar.
3 Click on the Status menu item from the Device menu.
4 In the Status Report window, if a checked box appears in the Detail/warnings column for a row,
double click on that row to display additional information.
5 Click OK to close the status report window.
3