User Manual

Using CDMA LMF – continued
PRELIMINARY 2
SC 4812ET BTS Optimization/ATP – CDMA LMF
July 1999
3-20
Figure 3-11: Four–frame BTS with an RFDS BTS
Selecting and Deselecting
Devices
Devices can be selected by clicking on a device or by using the Select
menu. Devices can also be deselected by clicking on a device or by using
the Select menu. Table 3-10 provides the procedure to select or deselect
devices from the menu bar. Follow this procedure to select or deselect all
of the devices of a particular type.
Prerequisite: Device is listed in the CDF file and is responding (not
gray or purple).
Table 3-10: Selecting and Deselecting Devices
 Step Action
1 From the menu bar, click on Select.
2 From the Select menu list, make your selection. The device selected will be darkened to indicate
your selection.
3
NOTE
If the Select menu list on the BTS tab is used, all devices in the BTS are selected (based on the
selection menu item used). If the Select menu list on the cage display is used, only devices in the
displayed cage are selected.
The LMF allows you to invert the menu list items by clicking on the Invert Selection menu item
from Select on the menu bar.
4 To deselect devices, from the Select menu list, click on Deselect All. The color of devices changes
to reflect their current state.
An alternative way of selecting or deselecting devices is to
click on the device displayed. As you place the cursor over
the device, the name and number of the device is
displayed.
NOTE
3