User Manual

Preparing the LMF – continued

PRELIMINARY 2

July 1999

3-15

SC 4812ET BTS Optimization/ATP – CDMA LMF

data Folder

The data folder contains a Device Definition Structure (DDS) data file

for each supported device type. The DDS files are used to specify the

CDF file data that is used to download data to a device. Current version

DDS files for each supported device type are created in this folder from

the LMF CD ROM as part of the LMF installation/update process.

Figure 3-8 shows an example of the file naming syntax for a code load

file.

Figure 3-8: DDS File Name Syntax Example

csm.dds–0800

Device Type

Device Bin Type Number

If this number matches the bin

number of the device, the DDS file

will automatically be used for the

download*

* The device bin number can be determined by using the Status

function after logging into a BTS. If the device does not have a bin

number, one of the following default numbers must be used:

GLI=0100

LCI=0300

MCC=0C00

BBX=0600

BDC=0700

CSM=0800

TSU=0900

LPAC=0B00

Logging Into a BTS

Logging into a BTS establishes a communications link between the BTS

and the LMF. You may be logged into one or more BTS’s at a time, but

only one LMF may be logged into each BTS.

Before attempting to log into the BTS, confirm the LMF is properly

connected to the BTS (see Figure 3-2). Follow the procedures in

Table 3-7 to log into a BTS.

Table 3-7: BTS Login Procedure

 Step Action

NOTE

Confirm a bts-nnn folder with the correct CDF and CBSC file exists.

1 Click on Login tab (if not displayed).

2 Double click on CDMA (in the Available Base Stations pick list).

. . . continued on next page