User Manual

Preparing the LMF – continued

PRELIMINARY 2

SC 4812ET BTS Optimization/ATP – CDMA LMF

July 1999

3-14

code Folder

The code folder contains the binary files used to load code into the

devices. A unique binary code file is required for each device type in the

BTS to be supported with the LMF. Current version code files for each

supported device created in this folder from the LMF CD ROM as part

of the LMF installation/update process. Figure 3-7 shows an example of

the file naming syntax for a code load file.

Figure 3-7: Code Load File Name Syntax Example

bbx.ram.bin–0600

Device Type

Hardware bin number

If this number matches

the bin number of the

device, the code file will

automatically be used

for the download*

* The device bin number can be determined by using the

Status function after logging into a BTS. If the device

does not have a bin number, one of the following default

numbers must be used:

GLI=0100

LCI=0300

MCC=0C00

BBX=0600

BDC=0700

CSM=0800

TSU=0900

LPAC=0B00

MAWI=0D00

If a code file with the correct version and bin numbers is not found, a file

selection window appears.