User Manual

Preparing the LMF – continued
PRELIMINARY 2
July 1999
3-11
SC 4812ET BTS Optimization/ATP – CDMA LMF
Table 3-6: Procedures to Copy CAL Files from Diskette to the CBSC
 ActionStep
8 Type in the following and press the Enter key.
=> ls –l *.cal
Verify the cal files have been copied.
9 Type in the following and press the Enter key.
=> eject
10 Remove the diskette from the workstation.
Folder Structure Overview
The LMF uses a wlmf folder that contains all of the essential data for
installing and maintaining the BTS. The list that follows outlines the
folder structure for the LMF. Except for the bts–nnn folders, these
folders are created as part of the the LMF installation.
Figure 3-3: LMF Folder Structure
version folder (A separate folder is
required for each different version; for
example, a folder name 2.8.1.1.1.5)
loads folder
(C:)
wlmf folder
cdma folder
code folder
data folder
BTS–nnn folders (A separate folder is
required for each BTS where bts–nnn is the
unique BTS number; for example, bts–163)
wlmf Folder
The wlmf folder contains the LMF program files.
cdma Folder
The cdma folder contains the following:
 bts–nnn folders
 loads folder
. . . continued on next page
3