User Manual

Preparing the LMF – continued
PRELIMINARY 2
SC 4812ET BTS Optimization/ATP – CDMA LMF
July 1999
3-10
Updating CBSC LMF Files
After completion of the TX calibration and audit, updated CAL file
information must be moved from the LMF Windows environment back
to the CBSC, residing in a Unix environment. The following procedures
detail moving files from one environment to the other.
Copying CAL files from LMF to a Disk
Follow the procedures in Table 3-5 to copy the CAL files from an LMF
computer to a 3.5 diskette.
Table 3-5: Procedures to Copy Files to a Diskette
 Step Action
1 Insert a disk into Drive A:.
2 Launch Windows Explorer from your Programs menu list.
3 Select the applicable wlmf/cdma/bts–# folder.
4 Drag the bts–#.cal file to drive A.
5 Repeat Steps 3 and 4 as required for other bts–# folders.
Copying CAL Files from Diskette to the CBSC
Follow the procedures in Table 3-6 to copy CAL files from a diskette to
the CBSC.
Table 3-6: Procedures to Copy CAL Files from Diskette to the CBSC
 Step Action
1 Log in to the CBSC on the workstation using your account name and password.
2 Place your diskette containing calibration file(s) in the workstation diskette drive.
3 Type in the following and press the Enter key.
=> eject –q
4 Type in the following and press the Enter key.
=> mount
NOTE
Check to see that the message “floppy/no_name” is displayed on the last line.
5 Type in the following and press the Enter key.
=> cd /floppy/no_name
6 Type in the following and press the Enter key.
=> cp /floppy/no_name/bts–#.cal bts–#.cal
7 Type in the following and press the Enter key.
=> pwd
Verify you are in your home directory
. . . continued on next page
3