User Manual

Optimization Overview – continued
PRELIMINARY 2
SC 4812ET BTS Optimization/ATP – CDMA LMF
July 1999
1-4
– Site PN
– Site Paging & Traffic Channel Allocation
– Board Placement
– Site Wiring Lists
– CDF files.
 Demarcation Document (Scope of Work Agreement)
 Equipment Manuals for non-Motorola test equipment.
Additional Information
For other information, refer to the following manuals:
 CDMA LMF Operators Guide
(Motorola part number 68P64114A21)
 4812ET Field Replacement Units Guide
(Motorola part number 68P64114A24)
Test Equipment Overview
CDMA LMF is used in conjunction with Motorola recommended test
equipment, and it is a part of a “calibrated test set.” To ensure consistent,
reliable, and repeatable optimization test results, only recommended test
equipment supported by CDMA LMF must be used to optimize the BTS
equipment. Table 1-1 outlines the supported test equipment that meets the
technical criteria required for BTS optimization.
Table 1-1: CDMA LMF Test Equipment Support Table
Item Description
Hewlett Packard, Model
HP 8921A
Cellular Communications Analyzer
(includes 83203B CDMA interface
option)
Hewlett Packard, Model
HP 8983236A
PCS Interface for PCS Band
Hewlett Packard, Model
HP 8935
Cellular Communications Analyzer
Motorola CyberTest Cellular Communications Analyzer
Advantest R3465 with
3561 CDMA option
(Japan–CDMA also uses
TX test menu PCMCIA)
Cellular Communications Analyzer
Gigatronix 8541C Power Meter
HP437B Power Meter
To ensure consistent, reliable, and repeatable optimization test results,
test equipment meeting the following technical criteria should be used to
1