User Manual

Prepare to Leave the Site – continued
July 1999
6-3
SC 4812ET BTS Optimization/ATP – CDMA LMF
PRELIMINARY 2
LMF Removal
DO NOT power down the CDMA LMF without
performing the procedure indicated below. Corrupted/lost
data files may result, and in some cases, the CDMA LMF
may lock up.
CAUTION
Follow the procedures in Table 6-4 to terminate the LMF session and
remove the terminal.
Table 6-4: Procedures to Copy CAL Files from Diskette to the CBSC
 Step Action
1 From the CDMA window select File>Exit.
2 From the Windows Task Bar click Start>Shutdown.
Click Yes when the Shut Down Windows message
appears.
3 Disconnect the LMF terminal Ethernet connector from the
BTS cabinet.
4 Disconnect the LMF serial port, the RS-232 to GPIB
interface box, and the GPIB cables as required for
equipment transport.
Reestablish OMC-R Control/
Verifying T1/E1
After all activities at the site have been completed,
including disconnecting the LMF, place a phone call to the
OMC-R and request the BTS be placed under control of
the OMC-R.
IMPORTANT
*
6