User Manual

Module Front Panel LED Indicators and Connectors – continued

July 1999

5-27

SC 4812ET BTS Optimization/ATP – CDMA LMF

PRELIMINARY 2

Figure 5-3: MCC24 Front Panel

PWR/ALM LED

LENS (REMOVABLE)

ACTIVE LED

PWR/ALM ACTIVE

MCC24 FRONT PANEL

LPA Shelf LED Status

Combinations

LPA Module LED

Each LPA module contains a bi–color LED just above the MMI

connector on the front panel of the module. Interpret this LED as

follows:

 GREEN — LPA module is active and is reporting no alarms (Normal

condition).

 Flashing GREEN/RED — LPA module is active but is reporting an

low input power condition. If no BBX is keyed, this is normal and

does not constitute a failure.