User Manual

Generate an ATP Report – continued

PRELIMINARY 2

SC 4812ET BTS Optimization/ATP – CDMA LMF

July 1999

4-24

The test results are not stored if the status report window is

closed with use of the Dismiss button. Use the Save

Results button to save the results and exit the status report

window.

The bts–#.rpt file is not a text file and the contents can not

be viewed with use of an editor. Only the files created

with use of the save function in the test report window can

be viewed with an editor and printed.

The bts–#.rpt file becomes corrupted, an error message

will appear when the status report window OK button is

clicked. In this case, the bts–#.rpt file will have to be

deleted.

NOTE

Print Test File Procedure

The procedure in Table 4-11 is used for printing a test report.

Table 4-11: Procedure to a Test Report

 Step Action

1 Open the file with an editor (e.g., Notepad, Wordpad, or

Word). If the file contents do not display correctly with

Notepad, use Wordpad or Word.

2 Use File > Page Setup to change the page layout for a

test report as follows:

 Top, Bottom, Left, and Right Margin = 0.5 inch

 Page = Landscape

3 Print the file.

If additional information is available for a failed test, it is

included at the end of the report with a reference to the line

number of the failed test.

NOTE