User Manual

Generate an ATP Report
July 1999
4-23
SC 4812ET BTS Optimization/ATP – CDMA LMF
PRELIMINARY 2
Background
Each time an ATP test is run, an ATP report is updated to include the
results of the most recent ATP tests. The ATP report will not be updated
if the status reports window is not closed with use of the OK button.
ATP Report
A separate report is created for each BTS and includes the following for
each test:
 Test name
 BBX number
 Channel number
 Carrier number
 Sector number
 Upper test limit
 Lower test limit
 Test result
 PASS or FAIL
 Description information (if applicable)
 Time stamp
 Details/Warning information (if applicable)
Follow the procedures in the Table 4-10 to view the ATP report for a
BTS.
Table 4-10: Generate an ATP Report
 Step Action
1 Click on the Login tab if it is not in the forefront.
2 Select the desired BTS from the Available Base Stations pick list.
3 Click on the Report button.
Printing an ATP Report
Each time an ATP test is run, the test results are stored in a
wlmf\cdma\bts–#.rpt file in the BTS folder. The test results are
updated each time a test is run so only the latest results are displayed for
each test type. The test report for a BTS can be viewed or saved to a
file. A saved file can be used to print a hard copy of the report.
4