User Manual

TX Waveform Quality (rho) Acceptance Test – continued

PRELIMINARY 2

July 1999

4-15

SC 4812ET BTS Optimization/ATP – CDMA LMF

Rho ATP

Follow the steps outlined in Table 4-6 to verify the Pilot channel

waveform quality (rho) on the specified TX antenna paths using BBXs

equipped at the BTS.

Table 4-6: Rho ATP

 Step Action

1 Select the BBX2(s) to be tested.

2 From the Tests menu, select Rho.

3 Select the appropriate carrier(s) displayed in the Channels/Carrier pick list (use the <Shift> or

<Ctrl> key to select multiple items).

4 Type the appropriate channel number in the Carrier n Channels box.

Click OK.

5 Follow the cable connection directions as they are displayed.

6 Click OK to close the status report window.

NOTE

The communications test set will measure and return the transmitted Pilot channel element

waveform quality (rho). Rho represents the correlation between actual and perfect CDMA

modulation spectrum (1.0000 represents perfect correlation).