User Manual

RFDS Setup and Calibration – continued
PRELIMINARY 2
SC 4812ET BTS Optimization/ATP – CDMA LMF
July 1999
3-76
Program TSU NAM
The Program TSU NAM option allows for the entry of TSU
programming data.
Prerequisite
Ensure that the following has been completed prior to programming the
TSU NAM:
 MGLI is INS.
 TSU is powered up and has a code load.
Program TSU NAM
Follow the procedure in Table 3-44 to program the TSU NAM. The
NAM must be programmed before it can receive and process test calls,
or be used for any type of RFDS test.
Prerequisites
 MGLI is INS.
 TSU is powered up and has a code load.
Table 3-44: Program NAM Procedure
 Step Action
1 Select the RFDS.
2 Select the TSU.
3 Click on the TSU menu.
4 Click on the Program TSU NAM menu item.
5 Enter the appropriate information in the boxes (see
Table 3-42 and Table 3-43) .
6 Click on the OK button to display the status report.
7 Click on the OK button to close the status report window.
3