User Manual
Information Ov erview Chapter 1: Ov erview
Recommended tools
Each BTS FRU procedure specifies the recommended tools that are required during the
procedure. These tools along with some other useful tools are included in the following overall
tool list:
• T orque driver , capable of 2.3 N -m (20 in -lbs) to 5.6 N -m (50 in -lbs) torque
• T25 TORX bit with 12 -in Extension
• T20 TORX bit
• T10 TORX bit
• 19 mm open -end wrench (for N -type connectors)
• Flat blade screwdriver
• Side cutters
• Tie wraps
• Masking tape and marking pen (for making temporary cable markers)
• Removable XMI handle with two M5 screws
• SMA break over wrench - 1.02 N -M (9 in -lb)
• 3/8 inch ratchet
• 3/8 inch drive to 1/4 inch hex adapter
• 19 mm socket
• 10 mm socket
• 9/16 in socket
Abbreviations and Acronyms
T able 1 -1 identifies the equipment related abbreviations and acronyms used in this manual.
Table 1 -1 Abbreviations and Acron yms
Acronym
Denition
1X
One of two bandwidths currently defined in the IS -2000 CDMA
specification, which extends the capability of the IS -95A and B
specifications. 1X bandwidth provides wireless packet voice and data
transmission capability at up to 144 Kbps.
A Ampere or Amp
AC
Alternating Current
ACC
Accessory
Continued
1 -6 68P09283A64 -3
FOA SEP 2007