Specifications

Alarms T esting Appendix E: Optimization and Calibr ation Procedures
Alarms Testing
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Alarm Verication
ALARM connectors provide Customer Alarm Inputs and Outputs. The customer can connect
UBS site alarm input sensors and output devices to the UBS , thus providing alarm reporting of
active sensors as well controlling output devices.
Alarm Reporting Display
The Alarm Monitor window can be displayed to list alarms that occur after the window is
displayed. T o access the Alarm Monitor window , select Util>Alarm Monitor .
The following buttons are included:
• The Options button allows for a severity level (W arning, Minor , and Major) selection.
The default is all levels. T o change the level of alarms reported click on the Options
button and highlight the desired alarm level(s). T o select multiple levels press the Ctrl
key (for individual selections) or Shift key (for a range of selections) while clicking on
the desired levels.
• The Pause button pauses/stops the display of alarms. When the Pause button is clicked
the name of the button changes to Continue . When the Continue button is clicked, the
display of alarms continues. Alarms that occur between the time the Pause button is
clicked and the Continue button is clicked are not displayed.
• The Clear button clears the Alarm Monitor display . New alarms that occur after the Clear
button is clicked are displayed.
• The Dismiss button dismisses/closes the Alarm Monitor display .
E -12 68P09283A63 -5
FOA A UG 2007