Specifications
1X UBS Macro B T S Optimization/A TP V erif ying and Setting GPIB Addresses – Agilent 8935 Series E6380 T est Set
Procedure D -6 V erif y and Set/Change Agilent 8935 Series E6380 T est Set GPIB
Address (Continued)
T o verify that the GPIB addresses are set correctly , press Shift and LOCAL on the 8935.
The current HP -IB address is displayed at the top of the screen.
HP -IB is the same as GPIB.
2
If the current GPIB address is not set to 18 , perform the following to change it:
1. Press Shift and Inst Cong .
2. Turn the Cursor Control knob to move the cursor to the HP -IB Adrs field.
3. Press the Cursor Control knob to select the field.
4. Turn the Cursor Control knob as required to change the address to 18.
5. Press the Cursor Control knob to set the address.
3
Press Preset to return to normal operation.
68P09283A63 -5 D -15
A UG 2007 FOA