Specifications
V erif ying and Setting GPIB Addresses – Agilent E4406A T r ansmitter T ester Appendix D: T est Equipment Prepar ation
Procedure D -3 V erif y and Set/Change Agilent E4406A T r ansmitter T ester GPIB
Address (Continued)
2. On the front panel Data Entry keypad, enter the communications system analyzer
GPIB address of 18
Result:
The GPIB Address label will change to Enter .
Digits entered with the keypad will replace the current GPIB address in the
display .
T o correct an entry , press the Bk Sp key at the upper right of the
keypad to delete one character at a time.
3. Press the Enter softkey button or the keypad Enter key to set the new GPIB address.
Result:
The Cong I/O softkey labels will reappear .
The new GPIB address will be displayed under the GPIB Address softkey label.
D -8 68P09283A63 -5
FOA A UG 2007