Specifications

Agilent E7495A/B T est Equipment Setup Appendix D: T est Equipment Prepar ation
Cable Calibration
F ollow the directions in the LMF application program to calibrate cables.
Additional cable calibration details - Calibrate the short cable (see Figure 3 -25 )
and two 10 dB attenuators to establish a baseline and then calibrate the TX and RX set -ups.
Because at least 40 dB of attenuation is needed when testing the FER, the set -up for RX is
the same as for TX.
D -6 68P09283A63 -5
FOA A UG 2007