Specifications

Individual T ests Chapter 4: Acceptance T est Procedures
Receive Signal Strength Indication (RSSI)
This test verifies the gain for UBS reverse (RX) paths for each carrier -sector selected is within
requirements for correct operation for the operating band of the UBS as follows:
• 1900 MHz: –80 dBm ( -86 dBm or greater)
• 800 MHz: –80 dBm ( -86 dBm or greater)
The LMF injects a -80 dBm signal (default) input to the UBS . The RS SI must be
+/ -6 dB.
4 -16 68P09283A63 -5
FOA A UG 2007