Specifications

Gener ate A TP R eport Chapter 4: Acceptance T est Procedures
Generate ATP Report
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Background
Each time an Acceptance T est Procedure (A TP) report is updated to include the results of the
most recent A TP tests if the Save Results button is used to close the status report window . The
A TP report is not updated if the status reports window is closed using the Dismiss button.
The A TP report for a UBS will contain test results saved with Save Results button.
Results will be saved for the last test performed on the same:
• Sector
• Carrier
• Channel
When an A TP report for a UBS is generated, all saved test results will be included
in the report.
ATP Report
Each time an A TP test is run, a report may be created for the UBS being tested. If a previous
report exists for the UBS , it is updated with the new test results as noted above. The report
includes the following for each test:
• T est name
• Channel number
• Carrier number
• Sector number
• T est result
• P AS S or F AIL
• Description information
• Time stamp
• Details/W arning information (if applicable)
The report can be printed if the LMF computer is connected to a printer . F ollow the procedure
in Procedure 4 -9 to view and/or print the A TP report for a UBS .
4 -26 68P09283A63 -5
FOA A UG 2007