Product Card

Acceptance T est Procedures - TX & RX Chapter 4: Acceptance T est Procedures
Procedure 4 -5 All TX A TP T est (Continued)
2
On LMF , select devices to be tested.
T o select multiple items, hold down the Shift or Ctrl key while
making the selections.
3
Click on T ests in the BTS Menu bar , and select All TX A TP ... from pull-down
menu.
4
Select the appropriate carrier (HDModem) from those displayed in the
Channels/Carrier pick list.
5
V erify that the correct channel number for the selected
carrier is shown in the Carrier # Channels box.
If not obtain the latest bts-#.necf files.
If necessary , the correct number may be manually entered into
the Carrier # Channels box.
6
In the T est P attern box, select the Standard test pattern from the drop
down list in the Bay Level Offset Calibration section. Other selections are
available for TX Mask only .
7
Click OK to display a status bar followed by a Directions pop-up window .
8
F ollow the cable connection directions as they are
displayed, and click the Continue button to begin testing.
As the A TP process is completed, results will be displayed in a status report
window .
9
Click the Save Results or Dismiss button.
If Dismiss is used, the test results will not be saved in the test
report file.
4 -12 68P09283A63 -5
FOA A UG 2007