Product Card

1X UBS Macro B T S Optimization/A TP Using WinLMF

CLI Format Conventions

The CLI command can be broken down in the following way:

• verb

• device including device identiﬁer parameters

• switch

• option parameters

keywords

equal signs

parameter values

Spaces are required between the verb, device, switch, and option parameters. A hyphen is re-

quired between the device and its identiﬁers. The following is an example of a UBS CLI command:

conﬁgure sc -<bts#> -<sector#> -<carrier#> pgain=<pgain#>

mdm_slot=<mdm_slot#> ce=<ce#> [pnoffset=<pnoffset#>]

Refer to the

W inLMF CDMA CLI Commands – 68P09275A12

manual for further information

on CLI commands and their use.

Logging into a UBS

Logging into a UBS establishes a communications link between the UBS and the LMF . An LMF

session can be logged into only one UBS at a time.

Prerequisites

Before attempting to login to a UBS , ensure the following have been completed:

• The LMF is properly connected to the UBS (see Figure 3 -2 )

• The LMF application program is correctly installed and prepared

• Preparing the LMF for Connectivity and Conﬁguring the Controller of UBS procedures

are completed

• The LMF computer was connected to the UBS before starting the W indows operating

system and LMF software. If necessary , restart the computer after connecting it to the

UBS in accordance with Procedure 3 -3 and Figure 3 -2 .

• When the PC has completed startup, click on WinLMF with UBS Support icon Figure 3 -3

to bring up the Local T erminal window ( Figure 3 -4 )

• IP Address is 128.0.0.xxx

• Netmask address is 255.255.255.128

• BlackICE or other similar process is disabled

• W indow

Internet Connection Firewall

and other ﬁrewall programs should be disabled

• Java Runtime Environment (JRE) is installed and version matched

68P09283A63 -5 3 -9

FOA A UG 2007