Manual

P ack et B T S shutdown procedures Chapter 3: R eference Procedures P erformed A t OMCR

Procedure 3 -2 Shutdown site signaling functions procedure for a pack et B T S

(Continued)

This step edits the REDIRECT parameters so that the Global Service Redirect

Message to be broadcast on the paging channel redirects all subscribers away from

the BTS and onto a different BTS or system.

Enter the following command at the prompt:

omc-000000> EDIT BTS-<bts#> REDIRECT!

The system prompts to enter each command parameter value one at a

time. Answer the prompts in the following order with the entries shown:

<accolc0> enter Y , <accolc1> enter Y , . . . <accolc15> enter Y

(All Access Overload Classes must be set to yes to ensure that all subscribers are redirected.)

<returniffail> enter N

( Must be set to no to ensure that subscribers do not return if redirect is unsuccessful.)

<recordtype> enter 1 or 2

(A value of 2 will invoke REDIRECT2 which is used to

redirect subscribers to a CDMA channel at a neighbor site.

<expectedsid> enter 13

(Use the Area ID the subscriber units should expect to ﬁnd on the system where they are

being redirected. This example uses 13. The valid range is 0–32767; the default is 0.)

<ignorecdma> enter Y

<sysordering> enter CUSTOM

(The system acquisition ordering value tells the mobiles the order to use when attempting to

obtain service on the different analog systems. V alid values are:

• CUSTOM — use custom system selection

• AONL Y — try the A system only

• B ONL Y — use the B system only

• AFIRST — try the A system ﬁrst. If unsuccessful, try the B system

• BFIRST — try the B system ﬁrst. If unsuccessful, try the A system

• AORB — try A or B. If unsuccessful, try the alternative system

CUSTOM is the default.)

<rotatetimer> enter 4

(Call processing continuously rotates in circular right-shifts, the Y/N values of Access

Overload Class Redirect Flags 0 to 9. V alues are shifted one ﬂag at the end of the timer

period; then timer restarts. V alid values are 0–255; 4 is the default.)

Continued

3 -6 68P09283A64 -3

FOA SEP 2007