Manual

P ack et B T S shutdown procedures Chapter 3: R eference Procedures P erformed A t OMCR
Packet BTS shutdown procedures
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■
■
Shutdown site signaling functions for a packet BTS
If a complete site shutdown is required to support maintenance or upgrade operations, follow
Procedure 3 -2 to disable the packet BTS site.
This site shutdown procedure tak es the target B T S out -of -service (OOS) but does not
affect other B T Ss. T o minimiz e system impact, it ma y be advisable (but not necessary)
to perform this procedure during a maintenance window .
• The EDIT BTS REDIRECT or REDIRECT2 command does NOT affect calls in
progress and does NOT move these calls to another BTS . The command prevents
future calls from being originated on the targeted BTS and also redirects
subscribers to another site/carrier . If active call processing is still taking place
in the target BTS , wait for any active calls to terminate before locking/disabling
the BTS resources.
• Refer to the System Commands Reference manual for a complete explanation
of OMCR commands.
3 -4 68P09283A64 -3
FOA SEP 2007