Installation Manual

T asks 2 -3: Installing R ack & Ground Cable Chapter 2: UBS Macro B T S Installation Procedure

Tasks 2 -3: Installing Rack & Ground Cable

■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■

■

Objectives

The objectives of this procedure are as follows:

• Mount the rack to the ﬂoor .

• Install the ground cable (DD).

Rack requirements

The UBS Macro BTS equipment is designed to be mounted in an open standard 19–inch rack.

T o ensure proper equipment support, grounding, and easy installation, Motorola recommends

that the UBS Macro BTS equipment be mounted in one of the following applicable Motorola

racks:

• STHN4120 19–inch (1800 mm)

• STHN4121 19–inch (1400 mm)

• STHN4122 19–inch (1000 mm)

Structural engineer prerequisite

Ensure that the procedure, tools, and equipment required to mount the rack to the ﬂoor are

speciﬁed by a Structural Engineer .

2 -28 68P09283A62 -3

PRELIMINARY A UG 2007