Installation Instructions

XMI F an T r a y Assembly Chapter 7: XMI R eplacement Procedures
Required Items
Manpower
• T wo people are required to lift, carry , or handle the XMI module.
Documents
• None
Tools
• T20 TORX Bit
• T25 TORX Bit
• T orque Driver
• XMI removable handle with two M5 screws
• Heat protective gloves for handling/touching a “HOT" XMI
Replacement Unit
• XMI fan tray assembly with five 27 V DC fans (Motorola model STLN6404)
Prerequisites
Do not touch the XMI with unprotected hands when the “HO T" label is fully visible. If
the “HO T" label is fully visible, wear heat protectiv e glo v es when touching the metal
case of the XMI. The “HO T" label becomes fully visible when the temper ature of the
metal case of the XMI reaches 50 degrees C. Howev er , the label ma y be partially
visible at lower case temper atures.
XMI fans must be completely stopped before remo ving the XMI fan tr a y assembly .
7 -26 68P09283A64 -3
FOA SEP 2007