User Manual

1X UBS Macro B T S Optimization/A TP R equired T est Equipment and Softw are
A combination of test equipment supported by the LMF may also be used during calibration
and testing of the RF communications portion of UBS equipment when the communications
system analyzer does not perform all of the following functions:
• Frequency counter
• RF power meter (average)
• RF signal generator (capable of CDMA modulation)
• Spectrum analyzer
• CDMA code domain analyzer
GPIB Cables
• Hewlett P ackard 10833A or equivalent; 1 to 2 meters (3 to 6 feet) long used to interconnect
test equipment and LMF terminal.
Timing Reference Cables
• T wo BNC -male to BNC -male RG316 cables; 3.05 m (10 ft.) long. Used to connect the
communications analyzer to the timing reference in the UBS frame.
Digital Multimeter
• Fluke Model 8062A with Y8134 test lead kit or equivalent; used for precision DC and
AC measurements, requiring 4–1/2 digits.
LMT Cable
RJ–45 to RJ -45 Cable, 6–8 feet long.
High–impedance Conductive Wrist Strap
• Motorola Model 42–80385A59; used to prevent damage from Electrostatic Discharge
(ESD) when handling or working with modules.
68P09283A63 -5 1 -11
FOA A UG 2007