User's Manual
Verifying IOS Canned Version of the CF Memory Card68P09258A31–A
Oct 2003
1X SCt 4812T BTS Optimization/ATP
J-15
Method 1: Using a TFTP Server to Load to CF Memory Card
Required Equipment and Software
The following items are required to perform this procedure:
S A Windows–based computer which meets the requirements of the
LMF computer platform as specified in this manual.
S One of the following operating systems for the Windows–based
computer:
– Windows 2000
– Windows 98 Second Edition (SE) using the FAT32 file system
CAUTION
BTS router CF memory cards loaded using computers equipped
with Windows 98 versions earlier than Windows 98 SE and using
the FAT16 file system will not operate properly, resulting in a
complete site outage.
S One of the following for the Windows–based computer:
– Internal 10/100baseT Network Interface Card (NIC)
– PCMCIA 10/100baseT NIC
S Cable, Ethernet crossover, Category 5E or better, unshielded twisted
pair, two 8–contact modular plugs, in one of the following lengths, as
determined necessary:
– 0.3 m (11.8 in) (Motorola pn 3088643C07)
– 0.6 m (23.6 in)(Motorola pn 3088643C13)
– 1.0 m (39.4 in) (Motorola pn 3088643C15)
– 2.1 m (84 in) (Motorola pn 3088643C08)
– 3.0 m (120 in) (Motorola pn 3088643C09)
S Cable, rollover, as described in the Establishing a BTS Router
Communication Session section of this Appendix
S DB–9 plug–to–8–contact modular plug adapter as described in the
Establishing a BTS Router Communication Session section of this
Appendix
S A tftp server software application (refer to the Setting Up the TFTP
Server – Procedure in Cellular System Administration – CDMA
OnLine Documentation) such as:
– Cisco tftp server
– PumpKIN tftp server
– Any other equivalent tftp server application
S A copy of the MWR 1941 router IOS version required for the network
where the routers are to be installed (contact the network administrator
or the Motorola account team for information on obtaining the
required MWR 1941 IOS version)
S A +27 Vdc power supply to power the BTS router during
configuration file operations
Required Materials
The following material is required to perform this method:
S Marking material to identify the BTS router and CF memory card with
the installed configuration (blue or red)
J