User's Manual

Downloading Minimum Canned BTS Router Configuration Files68P09258A31–A

Oct 2003

1X SCt 4812T BTS Optimization/ATP

J-11

Table J-3: BTS Router Canned Configuration File FTP Transfer from the OMC–R

Step Action

Change to the binary transfer mode and, if desired, turn on hash mark printing for transfer progress by

entering the following, pressing the Enter key after each command:

bin

hash

A response similar to the following will be displayed:

ftp> bin

200 Type set to I.

ftp> hash

Hash mark printing On ftp: (2048 bytes/hash mark) .

ftp>

NOTE

With Win98 SE, turning on hash mark printing can slow down file transfer in certain circumstances,

but the canned configuration files are quite small (approximately 2.5 KB) so there should be little

noticeable effect.

14 Download the BTS router canned configuration files to the LMF computer by performing the following:

14a – Enter the following to download the first canned configuration file:

get btsrtr_canned.blue

A response similar to the following will be displayed:

ftp> get btsrtr_canned.blue

200 PORT command successful.

150 Binary data connection for btsrtr_canned.blue (10.182.29.117,80) (2223 bytes).

226 Binary Transfer complete.

ftp: 2223 bytes received in 0.59Seconds 3.76Kbytes/sec.

ftp>

14b – Enter the following to download the second BTS router canned configuration file:

get btsrtr_canned.red

A response similar to the following will be displayed:

ftp> get btsrtr_canned.red

200 PORT command successful.

150 Binary data connection for btsrtr_canned.red (10.182.29.117,80) (2223 bytes).

226 Binary Transfer complete.

ftp: 2223 bytes received in 0.59Seconds 3.76Kbytes/sec.

ftp>

. . . continued on next page