User's Manual Part 3

RF Filter Tray – continued

9-62 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU MAY 2004

PRELIMINARY

Table 9-35: Procedure to Remove Filter Tray Kit SGLN6223

Step Action

3 Disconnect the RF cables (Input) in the following order:

– RX MAIN connector (blue) from RX MAIN connector

RX DIV connector (green)

RX RFL–DIV connector (green)

RX FWD–DIV connector (green)

See Figure 9-23

4 Hold cables to one side and slide out filter tray to expose cable attached to rear connector (Output) of

the RX DIV filter.

5 Disconnect RX DIV (Output) cable (green).

6 Remove Filter Tray completely.

Figure 9-23: Filter Tray Connectors and Cable Part Numbers (SGLN6223)

RX DIV

Cable PN 3086617X05

RX MAIN

(from input)

Cable PN

3086617X35

FWD–DIV

Cable PN

3086617X18

RFL–DIV

Cable PN 3086617X08

Front View

Input Connectors

RX MAIN

(from output)

Cable PN

3086617X04

RX DIV

Cable PN 3086617X02

Rear View

Output Connector