User's Manual Part 2

Test Equipment Setup – continued

6-52 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU MAY 2004

PRELIMINARY

S CyberTest (High Power Configurations only)

S Advantest R3267 spectrum analyzer with R3562 signal generator

S Advantest R3465 spectrum analyzer with R3561L signal generator

and HP–437B or Gigatronics Power Meter

S Agilent E4406A transmitter test set with E4432B signal generator

S Agilent 8935 series E6380A communications test set (formerly HP

8935)

S Hewlett–Packard HP 8921 (with CDMA interface and, for 1.9 GHz,

PCS Interface) and HP–437B or Gigatronics Power Meter

S Spectrum Analyzer (HP8594E) – optional

S Rubidium Standard Timebase – optional

CDMA2000 1X Operation

Optimization and ATP testing for CDMA2000 1X sites or carriers may

be performed using the following test equipment:

S Advantest R3267 spectrum analyzer with R3562 signal generator

S Agilent E4406A transmitter test set with E4432B signal generator

S Agilent 8935 series E6380A communications test set (formerly HP

8935) with option 200 or R2K and with E4432B signal generator for

1X FER

S Agilent E7495A communications test set

Test Equipment Preparation

See Appendix B for specific steps to prepare each type of test set and

power meter to perform calibration and ATP.

Agilent E7495A communications test set requires additional setup and

preparation. This is described in detail in Appendix B.