User's Manual Part 2

Preparing the LMF – continued

MAY 2004 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU 6-13

PRELIMINARY

Table 6-3: Copying CDF or NECF Files to the WinLMF Computer

n ActionStep

4 Type mount and press the Enter key.

NOTE

S Look for the “floppy/no_name” message on the last line displayed.

S If the eject command was previously entered, floppy/no_name will be appended with a number.

Use the explicit floppy/no_name reference displayed when performing step 7.

5 Change to the directory, where the files to be copied reside, by typing cd <directoryname>

(e.g., cd bts–248) and pressing the Enter key.

6 Type ls and press the Enter key to display the list of files in the directory.

7 With Solaris versions of Unix, create DOS–formatted versions of the bts-#.cdf (or bts–#.necf) and

cbsc-#.cdf files on the diskette by entering the following command:

unix2dos <source filename> /floppy/no_name/<target filename>

(e.g., unix2dos bts–248.cdf /floppy/no_name/bts–248.cdf).

NOTE

S Other versions of Unix do not support the unix2dos and dos2unix commands. In these cases, use

the Unix cp (copy) command. The copied files will be difficult to read with a DOS or Windows text

editor because Unix files do not contain line feed characters. Editing copied CDF files on the

WinLMF computer is, therefore, not recommended.

S Using cp, multiple files can be copied in one operation by separating each filename to be copied

with a space and ensuring the destination directory (floppy/no_name) is listed at the end of the

command string following a space (e.g., cp bts–248.cdf cbsc–6.cdf /floppy/no_name).

8 Repeat Steps 5 through 7 for each bts–# that must be supported by the WinLMF computer.

9 When all required files have been copied to the diskette type eject and press the Enter key.

10 Remove the diskette from the CBSC drive.

AT THE WinLMF:

11 If it is not running, start the Windows operating system on the WinLMF computer.

12 Insert the diskette containing the bts-#.cdf (or bts–#.necf) and cbsc-#.cdf files into the WinLMF

computer.

13 Using MS Windows Explorer, create a corresponding bts–# folder in the <x>:\<lmf home

directory>\cdma directory for each bts–#.cdf/cbsc–#.cdf (or bts–#.necf/cbsc–#.cdf) file pair copied

from the CBSC.

14 Use MS Windows Explorer to transfer the bts-#.cdf (or bts–#.necf) and cbsc-#.cdf files from the

diskette to the corresponding <x>:\<lmf home directory>\cdma\bts–# folders created in Step 13.