User's Manual Part 2

Preparing the LMF – continued

6-10 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU MAY 2004

PRELIMINARY

Where:

<x> = the WinLMF computer drive letter where the CDMA WinLMF

home directory is located.

<lmf home directory> = the directory path or name where the CDMA

WinLMF is installed.

NECF Filename Conventions

and Directory Location

NECF

The NECF actually consists of two files: the NECB and NECJ. The

naming convention for the NECB and NECJ is:

NECB*bts#.xml

NECJ*bts#.xml

Where:

* = any characters can be substituted there

# = the actual integer BTS number

The NECB and its corresponding NECJ must have the exact same name,

except for the “B” and “J” difference after the initial NEC characters.

The NECB and the NECJ must reside in the

<WinLMF_HOME>\cdma\bts–# directory corresponding to the BTS

frame they are for.

Load Information File (LIF)

The LIF contains all the devices binaries available for the specified

System Software Release. It is the functional equivalent of the OLF file

that was used pre–Packet.

The naming convention for the LIF is:

NE_LIF.xml

The LIF must reside in the <WinLMF_HOME>\cdma\loads\<Software

Release Number> directory, where <WinLMF_HOME> = the home

directory in which the WinLMF is installed, usually C:\wlmf <Software

Release Number> = the System Software Release Number (e.g.

2.16.1.0.10).

Cal File

The Cal File still resides in the <WinLMF_HOME>\cdma\bts–#

directory and is named bts–#.cal, where # is the actual integer number of

the BTS.