User's Manual Part 2

TX Pilot Time Offset Acceptance Test – continued

MAY 2004

7-17

1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU

PRELIMINARY

Table 7-7: Test Pilot Time Offset

Step Action

Verify that the correct channel number for the selected carrier is shown in the Carrier # Channels

box.

– If it is not, obtain the latest bts–#.cdf and cbsc–#.cdf files from the CBSC.

NOTE

If necessary, the correct channel number may be manually entered into the Carrier # Channels box.

6 Click OK to display a status bar followed by a Directions pop-up window.

7 Follow the cable connection directions as they are displayed, and click the Continue button to begin

testing.

– As the ATP process is completed, results will be displayed in a status report window.

8 Click the Save Results or Dismiss button.

NOTE

If Dismiss is used, the test results will not be saved in the test report file.