User's Manual Part 2

Bay Level Offset Calibration – continued
6-88 1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU MAY 2004
PRELIMINARY
S LMF is logged into the BTS
S BBXs are OOS_RAM (yellow)
S BLO has been downloaded to the BBXs
Table 6-38: Create CAL File
Step Action
1 Select the applicable BBXs.
– The CAL file will be updated for the selected BBXs only.
2 Click on Device in the BTS menu bar, and select Create Cal File from the pull–down menu.
– A status report window will appear and display the results of the action.
3 Click the OK button to close the status report window.
6