User's Manual Part 1

Dimensions and Clearances – continued
PRELIMINARY
1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU
MAY 2004
2-18
Unit Clearances
The unit clearances are shown below.
Figure 2-6: Indoor Functional Clearances for BTS
Top View
Side View
NOTE:
For access to RF filter
tray, remove BTS from
the shelf.
Front View
Compact BTS
Mounting Plate
Side Clearance
50 mm minimum
Side Clearance
50 mm minimum
Rear Clearance
50 mm minimum
Front Clearance
50 mm minimum
100 mm minimum
clearance
125 mm minimum
clearance
NOTE:
If there is only one cCLPA, then
the top clearance is 100 mm (4
in.) minimum. The clearance
above a single BTS is 125 mm (5
in.) minimum.
For two BTSs the clearance is
250 mm (10 in.) minimum. See
Figure 2-7.
If two cCLPAs are used, the
clearance between them is 625
mm (20 in.) minimum. See
Figure 2-7.
BTS can be mounted
on either side of the
mounting plate
2