User's Manual Part 1

BTS Equipment Identification – continued
PRELIMINARY
1X SC480 BTS Hardware Installation, Optimization/ATP, and FRU
MAY 2004
1-28
RF Connectors
Figure 1-8 shows the RF connectors at the rear of the Compact BTS.
Modem Connector
Figure 1-8 shows the Modem connector at the rear of the Compact BTS
(not supported in SC480).
Circuit Breaker
Figure 1-8 and Figure 1-9 show the location of the –48VDC 20A circuit
breaker and +27VDC 25A circuit breaker, respectively.
DC Power Connection
Figure 1-8 and Figure 1-9 shows the location of the DC Power Terminal
Strip.
Ground
Figure 1-8 shows the location of the two ground screw holes for the
Compact BTS.
TME
–48V
+0V
20A
DC Power
Terminal Strip
–48 V
+0 V
TME
20A Circuit
Breaker
GROUND
(Screw Holes)
Figure 1-8: –48 VDC RF Connectors, Circuit Breaker, DC Power Terminal Strip, and
Ground Studs
1